[Hallicrafters] Re;HA-6 Transverter

[Glen Zook]

The power supply is wired so that both transverters cannot be turned on at the same time.  If only one transverter is used, there has to be a "dummy plug" with specific jumpers installed in the "other" socket so that the P-26 can be turned on.

If both transverters are turned on, the AC to the actual power supply is disconnected so that the power supply cannot be overloaded.

I have both the HA-6 and HA-2 as well as another HA-2 which I converted to 222 MHz.  The HA-6 and HA-2 are powered from a P-26.  The 222 MHz transverter is powered by a home brew equivalent of the Heath HP-23A (uses a transformer from a parted out SB-400).  
 
Glen, K9STH


Website:  http://k9sth.com


________________________________
 From: Walt Cates <cateswa at msn.com>
To: hallicrafters <Hallicrafters at mailman.qth.net> 
Sent: Friday, April 12, 2013 9:46 PM
Subject: [Hallicrafters] Re;HA-6 Transverter
 

They both use the P-26. The P-26 will power both the HA-2 and the HA-6 at the same time.