[Hallicrafters] FPM-300 And Station Accessory FPM-300SA

[Chris Kepus]

Hey Dale,

I don't know if there are any folks on this list that worked for H and, in
particular, on the FPM-300, but your work would make them proud and wish
that they had done it!  

Congratulations on an amazing bit of work (millions of bits? :-))!!  

I will be one of many who will ask for more detail, another way to pay a
compliment to such craftsmanship!  

Thanks for sharing.

73,
Chris
W7JPG


-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of Dale Parfitt
Sent: Friday, October 26, 2012 10:35 AM
To: hallicrafters at mailman.qth.net
Subject: [Hallicrafters] FPM-300 And Station Accessory FPM-300SA

Jim has kindly posted a couple of photos of the station accessory I built to
compliment my 300 Mark II.
The unit adds:
1. Hi Fi front firing speaker
2. Narrow audio CW filter with a post amp to make up for the filter loss.
3. RIT- this makes CW a joy. Now I can tune the other staion to a pleasant
beat note instead of being stuck at 1450Hz.
4. Switchable 14dB gain RF preamp. The preamp is in the rig and activated by
a relay and quite useful on 15 and 10M.
5. Built in 200W dummy load for tune up.
6. Custom wattmeter
7. Memory keyer with a Tune position.

Go to the Photos section and type in FPM.

Enjoy,

Dale W4OP
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html