[Hallicrafters] SX-117/HT-44 Slave

[Donley]

I have the same problem with a newly acquired SX-117 and HT-44. I can't get 
them to slave together. So I would be interested in any information toward a 
solution. Please post all messages to the group. Thanks.

Richard
KC9UB


----- Original Message ----- 
From: "kf9wv" <kf9wv at att.net>
To: <hallicrafters at mailman.qth.net>
Sent: Wednesday, April 11, 2012 9:43 AM
Subject: Re: [Hallicrafters] eMail address


> Waldo,need direction for the slave mode using the sx-117 and ht-44.Both 
> work seperately but will not tx in the slave mode,relay clicks but no rf 
> out.Hooked up per the instructions,using a dow key relay.Seems to me that 
> the signal from the rx is not getting to the tx when switched.I've checked 
> all tubes related.any ideas...George KF9WV
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html