[Hallicrafters] SX-28 Bandspread Dial Stringing

[Mike Everette]

You might try the SX-28 or 28A Military manual on BAMA (SX28Mil, SX28AMil).

You might also check the SX-28 Gearbox rebuild article on the Halli web site, also accesible via www.antiqueradio.org inder "Restorations" and then the link within the SX-28 article.

73
Mike
W4DSE

--- On Wed, 9/21/11, Joe Connor <joeconnor53 at yahoo.com> wrote:

> From: Joe Connor <joeconnor53 at yahoo.com>
> Subject: [Hallicrafters] SX-28 Bandspread Dial Stringing
> To: "hallicrafters at mailman.qth.net" <hallicrafters at mailman.qth.net>
> Date: Wednesday, September 21, 2011, 10:47 PM
> Does anyone have or a know a source
> for a dial-stringing diagram for the bandspread dial on an
> SX-28?Mine broke today. I've found diagrams for the
> band-pointer mechanism but none for the bandspread dial. 
>  
> The good news is that the geared main tuning works so well
> that I rarely have had to use the bandspread on an SX-28.
> However, out of a sense of completeness, I would like to
> have the bandspread working properly. 
>  
> As always, thanks for your help.
>  
>                      Joe Connor
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>