[Hallicrafters] SX101 MK2 Resto (ref URM-25)

[Ron Kolarik]

I found the note on the gears from the Agilent list. I'm still searching
for the detail on the stock gears that need machining but it may have
been on the HD that got bit by a lightning strike.  I seem to remember
the only machine work required was reboring the shaft hole and
possibly one of them needed to be thinned slightly.  A six pack  and a
friend with a lathe a should get that done or if you're careful a drill press
could work in a pinch.

>.....Original Message.....
>I have just posted images to the Photo Area of the Replacement Gears I can
>supply for your HP8640B Signal Generator.
>
>Here is the link.
>
><http://groups.yahoo.com/group/hp_agilent_equipment/photos/album/1691965163/pic/l\
ist>
>
>If you have any questions please contact me off list  WA0BAG at ARRL.NET

>Paul K.
>WA0BAG

Ron
K0IDT



----- Original Message ----- 
From: "Carl" <km1h at jeremy.mv.com>
To: "Ron Kolarik" <rkolarik at neb.rr.com>; "rbethman" <rbethman at comcast.net>; 
<hallicrafters at mailman.qth.net>
Sent: Thursday, November 17, 2011 7:57 AM
Subject: Re: [Hallicrafters] SX101 MK2 Resto (ref URM-25)


> Details please? There have been several attempts to duplicate the gears but died in 
> the prototyping stages. An Italian has been selling a decent repop on Fleaybay off 
> and on but I dont know the long term reliability.
>
> Usually "minor machining" amounts to a couple of hundred dollars unless you own the 
> machines.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- 
> From: "Ron Kolarik" <rkolarik at neb.rr.com>
> To: "rbethman" <rbethman at comcast.net>; <hallicrafters at mailman.qth.net>
> Sent: Wednesday, November 16, 2011 8:37 PM
> Subject: Re: [Hallicrafters] SX101 MK2 Resto (ref URM-25)
>
>
>> The gears are available in brass. Stock items but need minor
>> machining and there's a W0 ham selling replacements ready to
>> go. Can't find the note just now but if someone really wants the
>> information I'll dig it up.
>>
>> Ron
>> K0IDT
>>
>>
>> ----- Original Message ----- 
>> From: "rbethman" <rbethman at comcast.net>
>> To: <hallicrafters at mailman.qth.net>
>> Sent: Wednesday, November 16, 2011 4:42 PM
>> Subject: Re: [Hallicrafters] SX101 MK2 Resto (ref URM-25)
>>
>>
>>> Lee,
>>>
>>> The folks on the R-390 list and another list have been trying
>>> desperately trying to get the gears re-made.
>>>
>>> Consider yourself VERY fortunate!
>>>
>>> Bob - N0DGN
>>>
>>> On 11/16/2011 5:16 PM, kc9cdt at aol.com wrote:
>>>> Use mine regularly, for 10 yrs now...no problems.
>>>> Lee
>>>>
>>>>
>>> ______________________________________________________________
>>> Hallicrafters mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Hallicrafters at mailman.qth.net
>>>
>>> List Administrator: Duane Fischer, W8DBF
>>> ** For Assistance: dfischer at usol.com **
>>>
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> ______________________________________________________________
>> Hallicrafters mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Hallicrafters at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1411 / Virus Database: 2092/4020 - Release Date: 11/16/11
>>
>