[Hallicrafters] sx-117 alignment

[Richard Knoppow]

----- Original Message ----- 
From: "Jack Schrader" <w1jhs at myfairpoint.net>
To: <Hallicrafters at mailman.qth.net>
Sent: Saturday, March 05, 2011 12:52 PM
Subject: [Hallicrafters] sx-117 alignment


> I’ve been trying to align my sx-117 and right from the 
> start, paragraph 6.4, step 1, it says to keep 1.0v on pin 
> 6 of V10 and all I can get is a neg. voltage of from –5.0 
> to a –0.5. How could I possibly get a neg voltage on pin 6 
> as pin 6 is the plate of that tube?
>
> Help me!
>
> Jack

     Ooops, disregard my reply, it  _is_  dc,  I mis-read 
something. The voltage chart shows -0.4 volts at pin-6. 
Perhaps the instruction is a mis-print and means -1 volt.


--
Richard Knoppow
Los Angeles
WB6KBL
dickburk at ix.netcom.com