[Hallicrafters] QTH.COM ads et. al.

[Richard Knoppow]

----- Original Message ----- 
From: "TC Dailey" <daileyservices at qwest.net>
To: <hallicrafters at mailman.qth.net>
Sent: Saturday, July 09, 2011 4:51 PM
Subject: [Hallicrafters] QTH.COM ads et. al.


> What you guys COLLECTIVELY need to do is to STRIP OFF the 
> original messages
> and only post YOUR message - it would drastically cut down 
> on the AMOUNT of
> verbage that comes along.
> On the QTH.COM ads - they changed the homepage, so look 
> for "HAM RADIO
> INFO"; move your mouse there (no click), and it will 
> display "Classified
> Ads".

    I certainly agree about reasonable snipping and that the 
stuff QTH adds to each message should be snipped when 
responding, but, if _everything_ is snipped off it will 
sometimes be difficult to know what is being responded to. 
That's why I left your original message. The decision as to 
what and how much to snip must be left to the individual 
responder. Most people have some sense of this but I 
recommending reading over what you are going to send before 
sending it. Sometimes it takes a minute or two to see if it 
makes sense or if there are typos, etc.


--
Richard Knoppow
Los Angeles
WB6KBL
dickburk at ix.netcom.com