[Hallicrafters] Looking for interconnection cables for SX-117 HT-44Twins

[Jack Schrader]

Jim and all to use the ht44/sx117 in transceive mode one needs two coax 
cables made of RG-62 that are 28" long with phono plugs on each end. One 
that goes from the vfo output on the 117 to the vfo on the 44. The other 
goes from the xtal osc output on the 117 to the xtal osc on the 44.

Green wire from the 3.2 speaker tab on the 117 to pin 11 on the control plug 
on the 44. Black wire from GND on the 117 to pin 1 on the control outlet on 
the 44 and finally a yellow wire from the REC/STBY tab ( jumper removed) on 
the 117 to pin 7 on the control outlet plug on the 44.

Also the NORM / XCVE switch on the 44 must be in the XCVE position.

These connections are in addition to the usual antenna and changeover relay 
connections which are normally made.

Loudenboomer cables I cannot help you with as I don't own a Loudenboomer.

-----Original Message----- 
From: Jim Zellmer
Sent: Tuesday, January 11, 2011 11:26 PM
To: hallicrafters
Subject: [Hallicrafters] Looking for interconnection cables for SX-117 
HT-44Twins

After looking for sometime, I found a SX-117 receiver to go with my
HT-44 transmitter & HT-45 Loudenboomer.  Can anyone in Halli Land tell
me the specs on the cables or were I might find a set?

TNX

Jim Zellmer
KA0VSL
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hallicrafters at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3373 - Release Date: 01/11/11