[Hallicrafters] D-104 REPAIR

[K0DAN]

Thanks for the tip Walt. That's a good site, I've never seen them before.

I called them and unfortunately they don't have the replacement for the D-104 connectors. I spoke to Joe, the owner, who said the D-104's used no-longer-available Amphenol parts. He also suggested that I do an Epoxy repair on the connectors I have (a few of the pins have pulled out of the Bakelite), and that isn't a bad idea and sounds feasible. Think I'll give it as try unless a source for the Amphenol parts shows up on the reflectors.

Thanks and 73

Dan
K0DAN
  ----- Original Message ----- 
  From: Walt Cates 
  To: K0DAN 
  Sent: Tuesday, February 08, 2011 11:12 PM
  Subject: Re: [Hallicrafters] D-104 REPAIR


  @ http://www.therfc.com/micconn.htm  $1.50 EACH
  Best Regards, Walt Cates, WD0GOF, http://www.myhamshack.com/WD0GOF/

  I pity the self made man, he is definitely working at a disadvantage. I cherish the help from God, family and mentors.
    ----- Original Message ----- 
    From: K0DAN 
    To: hallicrafters at mailman.qth.net 
    Sent: Tuesday, February 08, 2011 10:34 PM
    Subject: [Hallicrafters] D-104 REPAIR


    I need to replace the male/female connectors which mate the D-104 "lollypop"
    mic element with the TU8-G grip stand. These look like fairly basic 3-pin
    connectors...can anyone give me part numbers, sources, etc.? Kinda hoping
    these are standard stock from Mouser or Digikey???

    Tnx es 73
    Dan
    K0DAN 

    ______________________________________________________________
    Hallicrafters mailing list
    Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
    Help: http://mailman.qth.net/mmfaq.htm
    Post: mailto:Hallicrafters at mailman.qth.net

    List Administrator: Duane Fischer, W8DBF
    ** For Assistance: dfischer at usol.com ** 


    This list hosted by: http://www.qsl.net
    Please help support this email list: http://www.qsl.net/donate.html