[Hallicrafters] [Hammarlund] Tuning capacitor grease info

[Al Parker]

Hi Bob,
	I usually use a small drop of synthetic oil, about 10-20 grade, or 
synth. gear oil to lube the bearings, some use a bit of Lubriplate or 
similar grease.  I use a paint brush to dust the plates.
	But, your scratchiness probably comes from the shaft sliders between 
sections.  A drop of DeOxit on each of them should cure that problem.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 12/16/2011 8:27 AM, Bob Fay wrote:
> What type of grease is used to lubricate the shaft bearings on tuning
> capacitors? Also what is the best way to clean between the plates of the
> tuning cap? The problem I am having is scratchy audio as the radio is tuned.
>
>
>
> Bob    WC0D
>
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>