[Hallicrafters] The SR-2000 and sellers of "MATCHED" 8122's

[Duane Fischer, W8DBF]

Thank you James. Good stuff! Hope to work you today on 20M, even if by 
relay.

----- Original Message ----- 
From: "james.liles" <james.liles at comcast.net>
To: <hallicrafters at mailman.qth.net>
Sent: Saturday, October 23, 2010 11:58 PM
Subject: [Hallicrafters] The SR-2000 and sellers of "MATCHED" 8122's


> If you are an SR-2000 user buying matched 8122's for use in the SR-2000, 
> please be aware of the following caveats regarding the 8122.
>
> First, the Hallicrafters SR-2000 finals are run in the AB1 configuration 
> with high impedance drive.
>
> Second, the Hallicrafters engineers lamented that they had to buy a bushel 
> of 8122's to find a half dozen pairs that were matched AND would work in 
> the SR-2000.
>
> Why wouldn't any matched pair work in the SR-2000??  There are vast 
> variations in the parameters from tube to tube and between matched pairs. 
> The  Burle 8122's were color coded Red, Blue, Green, and Black to 
> distinguish the tube parameters which would help to predict the idle 
> current bias as well as the ability to NEUTRALIZE the tubes.  The Burle 
> tubes are the only 8122's that are color coded this way.  The Red and Blue 
> Burle tubes will work in the SR-2000 without modifying the transceiver or 
> power supply.  The Green Burle tubes can be made to work with 
> modifications to the transceiver bias configuration and neutralizing 
> bridge as well as a change to the P-2000 bias configuration.  The Black 
> version cannot be made to work well in the SR-2000.  Requires too much 
> bias to idle and cannot be neutralized even with mods.
>
> Why should this affect neutralization?  I  believe the reason to be the 
> precision that is required to accommodate the close spaced elements.  It 
> would appear that the control grid which should be in the shadow of the 
> screen to plate is a bit off causing the idle bias and feed back to vary 
> wildly.
>
> I would guess that the Black version will work in the NCL-2000 because 
> it's an AB2* amplifier with a low impedance input and wider bias control.
>
> The 8122 can be tested and profiled to predict matching, neutralizing, and 
> output parameters to determine the suitability of a pair for use in the 
> SR-2000.
>
> Kindest regards Jim K9AXN
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG.
> Version: 7.5.557 / Virus Database: 270.12.4/2081 - Release Date: 4/26/2009 
> 9:44 AM
>
>