[Hallicrafters] HT-17 and HT18
Carl
km1h at jeremy.mv.com
Mon Jun 14 08:47:37 EDT 2010
For #2 replace the paper caps (the audio ones arent activated unless in
NBFM) and check resistors for tolerance. Then align and select tubes for
best output. A 1614 will work better than a 6L6 on the higher bands, the 6L6
should be metal.
The spec is at least 4W from 80-15M and 2.5W on 10M and I get more than
that. Its possible yours is out of alignment or a PO changed the 20/15 links
for a different impedance.
I use mine as a QRP rig and also to drive a HT-9.
Carl
KM1H
----- Original Message -----
From: "Jack Schrader" <w1jhs at myfairpoint.net>
To: <alessandro.meregalli at ubs.com>; <hallicrafters at mailman.qth.net>
Sent: Monday, June 14, 2010 8:43 AM
Subject: Re: [Hallicrafters] HT-17 and HT18
>I would suggest Gary Brown, here in Maine, for the transformer rewind. He
> can be found at : xfrmrs at roadrunner.com
> ----- Original Message -----
> From: <alessandro.meregalli at ubs.com>
> To: <hallicrafters at mailman.qth.net>
> Sent: Monday, June 14, 2010 2:50 AM
> Subject: [Hallicrafters] HT-17 and HT18
>
>
>> Dear all,
>>
>> Question 1:
>> I own a nice HT-17 transmitter but the power supply transformer has gone.
>> Last time I switched it on all went bad and the transformer fried/burned.
>>
>> I suppose a replacement with the original type will be very difficult if
>> not impossible. I read on the Chuck Dachis "Hallicrafters" book that
>> someone in the US will rewind transformers and this would be a very nice
>> option to save the originality of the rig.
>> The other option could be to substitute the damaged transformer with a
>> NOS
>> one giving the same voltages and max current ratings but on the HT-17
>> manual I cannot find any electric data of this transformer.
>> What should I do ?
>>
>> Question 2:
>> I own a nice and working HT-18 exciter. In the M.O. switch position (VFO)
>> on 80m i get 3W output, on 40m 4W and on 10m 2.5W which is as per
>> specifications.
>> Unfortunately on 15m and 20m I only get 1W or below. Is just a question
>> of trim adjustments ?
>>
>>
>> Mni tnx es
>> 73, Alex HB9DTA
>>
>>
>> ______________________________________________________________
>> Hallicrafters mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Hallicrafters at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.829 / Virus Database: 271.1.1/2937 - Release Date: 06/14/10
> 01:35:00
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Hallicrafters
mailing list