[Hallicrafters] ht-44

[Arnie Adelman]

Jack, there's a switch on the back that's labeled Normal/Xcve.  Make sure 
it's in the "Normal" position, clean, working, etc. If in Xcve, it feeds the 
hetrodyne osc. output from the SX-117 into the HT-44.

arnie - W1GCI


----- Original Message ----- 
From: "Jack Schrader" <w1jhs at myfairpoint.net>
To: <hallicrafters at mailman.qth.net>
Sent: Wednesday, January 20, 2010 8:23 PM
Subject: [Hallicrafters] ht-44


> Well. here's the dummy from Maine with another question.
>
> I am trying to get my sx117 / ht44 combo working but as usual I'm having 
> trouble with the ht44. i have it set to work seperatly from the sx117 but 
> I cannot get any output. I've checked the voltages and they seem to be in 
> the ballpark. All tubes check ok. Got good B+ on the finals with only a 
> little dip when I key down. Have pulled all the crystals and de-oxited all 
> the tube and crystal sockets. Relay seems to operate ok.
>
> Suggestions what else I should look at?
>
> Thanks
>
> Jack
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>