[Hallicrafters] Screw type used to secure SX-28 case cover plate?

[wa1kbq at aol.com]

Off the top of my head I would guess the original screws were #6-32 x 1/4" Type -1 tapping with a slotted indented hex and black oxide finish. I will be heading up to the radio room after a while and will double check that. If I missed it I will report back.

-Greg





-----Original Message-----
From: jeff <vortex6066 at yahoo.com.au>
To: hallicrafters at mailman.qth.net
Sent: Sat, Aug 28, 2010 4:54 pm
Subject: [Hallicrafters] Screw type used to secure SX-28 case cover plate?


Hi,
ould someone please tell me the type (specification) of the screws used to 
ecure the cover plate on the bottom of the SX-28 case? I presume theyre not 
etric, so am lost, as have no familiarity with imperial types, and will need to 
uy some.
Ive got an SX-28 with no cover plate, and will have to make one up.
egards from "down-under",
EFF
hristchurch
ew Zealand

     
______________________________________________________________
allicrafters mailing list
ome: http://mailman.qth.net/mailman/listinfo/hallicrafters
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:Hallicrafters at mailman.qth.net
List Administrator: Duane Fischer, W8DBF
* For Assistance: dfischer at usol.com ** 

his list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html

=