[Hallicrafters] Knurl Nut Wrenches - Again!

[Mike Lopez]

Alas poor Walsco.........I knew him well.

Mike N8AZC


----- Original Message ----- 
From: "Roger (K8RI)" <Hallicraftersgroup at rogerhalstead.com>
To: <w9xf at comcast.net>
Cc: <hallicrafters at mailman.qth.net>
Sent: Sunday, April 19, 2009 6:49 PM
Subject: Re: [Hallicrafters] Knurl Nut Wrenches - Again!


>I finally found the one I've used over the years.
> It's a Walsco 2583. I can not find any mention of it in any search engine.
>
> 73
>
> Roger (K8RI)
>
> w9xf at comcast.net wrote:
>> Thanks again to everyone for the feedback regarding my SX-101A knurl nut 
>> situation. I'm getting both 1/2" & 5/8" wrenches from Tessco. $33.25 for 
>> the pair, plus S & H, whatever that will be.
>>
>>
>>
>> I'll let y'all know which one works on my '101A, MK III and HT-32A & 33A.
>>
>>
>>
>> 73,
>>
>>
>>
>> Steve
>> ______________________________________________________________
>> Hallicrafters mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Hallicrafters at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>