[Hallicrafters] SX-42 info needed

Carl km1h at jeremy.mv.com
Sat Apr 11 21:46:54 EDT 2009


Ive restored several SX-42's but never paid much attention to the run 
differences. Those and SX-62's are fun radios to work on!

OK on the micas, its becoming a regular occurance in the past few years 
across all brands, boatanchors, auto and house radios. That and the IF 
micas.

Just finishing a HRO-60 that at least 2 others have had their fingers 
into; what a mess of wrong values caps and miswiring! Plus about 20 
resistors, 3 dogbones and one mica were way out of tolerance. Its one 
hot radio now and I havent even done any alignment. At least its easy to 
work on.

As fast as one goes out another comes in, keeps me out of trouble.

Carl

----- Original Message ----- 
From: <HallicrafterSX28 at aol.com>
To: <Hallicrafters at mailman.qth.net>
Sent: Saturday, April 11, 2009 9:14 PM
Subject: Re: [Hallicrafters] SX-42 info needed


>
> You are welcome,Carl. Good luck on the restoration! The one I just
> finished working  on had  a bad wafer switch causing B+ to affect the 
> AVC bus!
> Luckliy the problem occurs  only on the two highest bands.
> Be on the lookout for bad silver micas ,and there is no shortage of 
> them in
> these SX-42's !!
> Regards
> AMK"Nick"
>
> In a message dated 4/11/2009 5:23:12 PM Pacific Daylight Time,
> km1h at jeremy.mv.com writes:
>
> Thanks  Nick.
>
> Carl
>
>
> ----- Original Message ----- 
> From:  <HallicrafterSX28 at aol.com>
> To:  <Hallicrafters at mailman.qth.net>
> Sent: Friday, April 10, 2009 7:53  PM
> Subject: Re: [Hallicrafters] SX-42 info needed
>
>
>>
>>  Yes, you've got yourself an early version Run1 Sx-42.I've got one
>>  sitting
>> here right in front of me on the bench.
>> There 3  different SX-42 manuals out there .the one that applys to 
>> this
>>  one
>> is dated 'June 1947'
>> Regards
>>  AMK"Nick"
>>
>> In a message dated 4/10/2009 4:48:16 PM Pacific  Daylight Time,
>> km1h at jeremy.mv.com writes:
>>
>> How  are  the run # determined? The one that just arrived is serial 
>> HA
>>  63007 and  there are no run stamps on the chassis...unless this is 
>> Run
>> 1.
>>
>> Carl
>> KM1H
>>
>>  ______________________________________________________________
>>  Hallicrafters  mailing list
>> Home:   http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help:   http://mailman.qth.net/mmfaq.htm
>> Post:   mailto:Hallicrafters at mailman.qth.net
>>
>> This list hosted  by:  http://www.qsl.net
>> Please help support this email  list: 
>> http://www.qsl.net/donate.html
>>
>>
>>
>>
>>  **************Worried about job security? Check out the 5 safest 
>> jobs
>>  in a
>> recession.
>>
> (http://jobs.aol.com/gallery/growing-job-industries?ncid=emlcntuscare00000003)
>>  ______________________________________________________________
>>  Hallicrafters mailing list
>> Home:  http://mailman.qth.net/mailman/listinfo/hallicrafters
>> Help:  http://mailman.qth.net/mmfaq.htm
>> Post:  mailto:Hallicrafters at mailman.qth.net
>>
>> This list hosted by:  http://www.qsl.net
>> Please help support this email list:  http://www.qsl.net/donate.html
>
>
>
>
>
> **************Worried about job security? Check out the 5 safest jobs 
> in a
> recession.
> (http://jobs.aol.com/gallery/growing-job-industries?ncid=emlcntuscare00000003)
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hallicrafters at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 



More information about the Hallicrafters mailing list