[Hallicrafters] SX-100 Mark 1A resistance chart

[Jim Theisen]

Thanks to all the Hallicrafter folks for your help.

I bought this unit on Ebay a year ago before the shipping went nuts and 
am just now getting around to fixing it.

The antenna post have been blown out by lighting or an arc welder and it 
looks bad.

I did fire it up and received some signals and I was amazed at that.

I have just changed out all the black beauties and red devil caps and 
only found 3 that would test on my

EICO 950B cap tester. How they can all be that bad is beyond me.

Anyway I will keep you posted and if anyone has some charts for voltage 
or resistance I would appreciate it.

Meanwhile I will take a look at my BAMA prints once again. The copy is 
so hard to read as is marked up a lot.

Here is my web site you Hallicrafter guys might enjoy it.

http://home.centurytel.net/lots-a-watts/index.htm

73's

Jim Theisen WB8REH



Hi,

Hallicrafters did not provide a separate voltage and resistance chart in 
the
manual, at least mine does not have one.  They are given on the schematic.
I haven't looked at the BAMA manual but if it has the schematic, you should
find the information.


Hi Hallicrafter Folks

I am looking for a Voltage and Resistance chart for the SX-100 Mark 1A
that I am rebuilding.

I have the manual from BAMA but not that information.

Any help would be appreciated, Thanks

Jim WB8REH
______________________________________________________________