[Hallicrafters] S-40A dial cord question

[WØQFC]

When I received my 'new'  S-40A both dial cords were broken and pieces loose 
on the chassis.

Looking at the restringing guide (Sam's restringing guide, 1947) and every 
other S-40 manual, it shows the bandspread cord going from the flywheel over 
the pulley and around the drum on the bandspread capacitor.

The problem is that the pulley and drum are not in alignment ~ with the 
pulley about 1/2" closer to the back of the chassis than the capacitor 
drum.The drum is fixed on the capacitor shaft and can not be moved and the 
pulley does have a set screw but because of the collar can not be moved 
toward the front of the chassis. (Hope this makes sense).

The above arrangement will not allow the pulley and drum to be aligned in a 
straight line. . . .

If anyone can help with this I would really appreciate it and better yet, if 
someone could take a picture of a 'working' unit.

TIA

73

Gene, WØQFC

www.w0qfc.com