[Hallicrafters] SX115 Mode switch problem on LSG

[rrkrr]

Mike,
I had the same problem with my SX-115 and I've had a similar problem 
with a Hammarlund HQ-215.  (Hmm, last two digits the same; maybe it's a 
numerology problem.....) I ended up replacing the BFO crystals in both 
to get reliable operation.  But try the alignment of the coil first, and 
replace any old paper capacitors.

Bob K4ERR

Mike Anderson wrote:
> Maybe someone has run across this problem. I have a SX115 in excecellent
> condition, when a rotate the mode switch to 
>
> LSB/CW or LSB/SSB I have a noiseless audio. If I rotate the mode switch
> to USB/CW or USB/SSB we have results, the receiver acts like a 75A4 in
> performance. What should I do to troubleshoot this rig give the
> operation issues. Has any one run into this problem before. 
>
>  
>
> Mike Anderson
>
> N5MV
>
>
>
>
> -----------------------------------------
> The information in this communication, including any attachments,
> is intended only for the person or entity to which it is addressed
> and may contain confidential, proprietary, and/or privileged
> material. Any review, retransmission, dissemination or other use
> of, or taking of any action in reliance upon, this information by
> persons or entities other than the intended recipient is
> prohibited. If you received this in error, please contact the
> sender and delete the material from all computers.
>
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> HHI Halligan's Hallicrafters International and www.w9wze.net
>
>