[Hallicrafters] Darn Capacitors

[Carl Nord]

Also, I mark off on a copy of the schematic any part I have changed in highlighter. If a resistor checks out OK I put a check mark next to it on the schematic. Then I have a record of where I have been and what I have done
 -------------- Original message ----------------------
From: Waldo Magnuson <magnuson at mac.com>
>     My usual practice in replacing capacitors is to replace 2 or 3 and 
> sometimes 4 and then see if the receiver still operates.  I make 
> sketches of the capacitors I am replacing and am very careful.
>     Well this time I replaced 5 capacitors (in my SX-28A) and now the 
> volume is way-way down.  The audio section appears okay (input via the 
> phono input).
> I'm checking resistor values, voltages, connections, etc. where I 
> replaced the capacitors (in the V6 and V7 area), but have not found the 
> problem.
>     I may be back for help - wish me luck.
> 73,  Skip  W7WGM
> 
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> HHI Halligan's Hallicrafters International and www.w9wze.net