[Hallicrafters] serial numbers & date

[WA1KBQ at aol.com]

Dremel would be best way, second choice approach would be hammer and small 
sharp chisel to cut crimp off from the inside.


In a message dated 1/3/2007 8:26:51 AM Eastern Standard Time, 
Troglodite at aol.com writes:

If  you would care to part with the serial number tag
from that SX-25 junker, I would like to have it.  The
tag on my SX-28 is badly damaged and the  number on
that 25 is "in the ball park."  Removing it would be
the interesting part.  I haven't ever done this but
have some ideas.



If you are removing it from a junker, just grind off the rivits on the  
INSIDE of the chassis. No damage to the serial plate. I removed the one off 
my  
junker SX-28 and sent it to someone. I used a Dremel tool which worked fine.