[Hallicrafters] I need a Junker SX 96 or SX100 OR SX101

[Roger D Johnson]

Rbethman wrote:
> Ollie,
>
> I added the SX-99 as the 99 and 100 are extremely similar.
>
> Bob - N0DGN
>
> Oliver J. Dragon wrote:
>> Gary may very well be confusing some with his inclusion of the 
>> SX-101, but I don't
>> think he listed the _SX-99_ for his parts needs. Clearly the SX-99 
>> does not apply, although
>> I would suspect the SX-96 is pretty close electrically to the SX-100 
>> at least.
>>
>> 73,
>> Ollie
>>
>> At 12:44 PM 2/2/2007, Rbethman wrote:
>>> Gary,
>>>
>>> You've got ME confused!
>>>
>>> I've got an SX-99 and an SX-101.
>>>
>>> There is NO chassis/cabinet interchangeable parts there - you could 
>>> place three SX-99s inside of ONE SX-101 cabinets.
>>>
>>> Neither the SX-99 or SX-100 has a 'separate' IF subchassis.  The 
>>> SX-99 and SX-100 are the SAME size ans SAME single chassis.  The 
>>> SX-101 is COMPLETELY different.  I've had SX-101's, SX-101As, and 
>>> SX-101 MkIIIs.
>>>
>>> What EXACTLY are YOU working on?
Wrong! The S-76, SX-96 and SX-100  all have a  50 kHz subchassis.  They 
are all dual conversion
receivers with  a 1650 kHz first IF. The SX-96 and the SX-100 use 
crystal control for the down
conversion to 50 kHz for sideband selection.

73, Roger

-- 
Remember the USS Liberty (AGTR-5)
http://ussliberty.org/