[Hallicrafters] Osc coil for a Halli Sky Buddy

[Joe Walden]

Sorry to bother the members of the Hallicrafters reflector but,I received an
email direct from WA1KPD about an osc coil for a Sky Buddy a few days ago.
I responded but have not received an answer.   Maybe the spam filter got it.
Anyway
For Carl,



Hello Carl,yes I still need the high band osc coil for the S-19R Sky
Buddy.Please email me or better call me at 405-321-4717.
I think your spam filter got my last response.   Joe    w5jdy at cox.net
----------------------------------------------------------------------------


Joe Walden dba,
Campus Music,
317 White Street,
Norman,Okla.73069






----- Original Message ----- 
From: "Carl Nord" <chnord at comcast.net>
To: "'Joe Walden'" <w5jdy at cox.net>
Sent: Saturday, October 14, 2006 4:32 PM
Subject: RE: [Hallicrafters] Sky Buddy Oscillator


> Joe,
> Do you still need the coil?
>
> Carl
> WA1KPD
> Visit My Boatanchor Collection at
> http://home.comcast.net/~chnord/wa1kpd.html
>
> -----Original Message-----
> From: hallicrafters-bounces at mailman.qth.net
> [mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of Joe Walden
> Sent: Tuesday, October 10, 2006 9:40 PM
> To: Hallicrafters at mailman.qth.net
> Subject: [Hallicrafters] Sky Buddy Oscillator Coil
>
> Hello all members of the various reflectors from Joe w5jdy in Okla.   I
> have a Hallicrafters Model S-19R
> Sky Buddy to repair that will not oscillate on band four (the highest
> frequency).  It works fine on all the other bands.
> All associated parts in the oscillator circuit have been replaced.  The
> only other parts used on band four that aren't used on the other bands is
> the oscillator coil,trimmer cap and a 100 mm cap (all parts are mounted on
> the coil form).   If available,I would like to purchase a band four coil
> from a parts unit..  If someone has a parts unit ,the band four coil
stands
> perpendicular by itself and has a  trimmer capacitor across the top.  It
> mounts with two metal screws and is close to the band switch.   You can
> just clip each wire a little ways from the each terminal (three on the top
> and two on the bottom of the coil) and I will clean it up.  Joe