[Hallicrafters] ht32b

[Richard D. Reese]

Jack;

When mine died on 40 and 15 meters all that was wrong was a dirty band 
switch.  Try Deoxit or other such cleaner.  May work - may not since it is 
possible but not too likely that all band switch positions are dirty except 
75 meters...

73 and good luck
Rich  WA8DBW



Richard D. Reese
http://www.wa8dbw.ifip.com
----- Original Message ----- 
From: "Jack Schrader" <w1jhs at midmaine.com>
To: "Hallicrafters List" <hallicrafters at mailman.qth.net>
Sent: Saturday, February 25, 2006 9:53 PM
Subject: [Hallicrafters] ht32b


I'm back to my 32b after getting the 101a up and running. I'll be on the 
halli net and vintage net tomorrow PM
so give a listen for me.

Here's my situation. I have output on 75m in both cw and lsb but nothing on 
any other band in either mode. I have replaced the tubular and two section 
caps in the sideband generating section. Al, w8ut, thinks it may be the mode 
switch has a bad contact. Anyone else had a problem like this and if so what 
did you do to fix it?
All tubes check ok. I have a scope but don't really know where to start 
looking.

Thanks for the help.

Tnx & 73

Jack