[Hallicrafters] Power Transformer For SX-28

[Rob Copeland]

To All that have responded... Thank you so much for your info and support.
Thankfully the transformer turned out to be good. The problem was the ground
tab was not bolted to the chassis. Being as it was hidden under the Phono
coax I had trouble finding it until I went to pull the transformer. Then low
and behold I found the loose tab and after a quick bench check of the
transformer I luckly found it to be good. Now back to the IF section. If
anyone has a diagram of how the IF Cans T1 -T3 are supposed to be connected
that would be extremely helpful. Seeing how the insulation was completely
gone from those units and the schematic I have does not show any sort of
color coding for the wiring of those IF cans.

Thanks Again! :)

Rob



-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net]On Behalf Of Rob Copeland
Sent: Friday, April 21, 2006 2:03 PM
To: Hallicrafters at mailman.qth.net
Subject: [Hallicrafters] Power Transformer For SX-28


I am looking for a power transformer for an SX-28. Anyone know where I could
find one?

Any help would be deaply appreciated. :)

Rob


______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Hallicrafters at mailman.qth.net
----
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org