[Hallicrafters] 4 pin tube socket

[Joe Walden]

Hello,all members of the various reflectors and a Happy,Happy Turkey Day
Weekend...  I have recently acquired an old Halli S-20 Receiver..  The
previous owner removed the 4 pin rectifier tube (80) socket and replaced it
with an 8 pin socket and used a 5Y3GT....   I know that is probably OK but,I
would like to change it back to original...  I thought I had plenty of 4 pin
tube sockets but after looking I did Not have one to fit the original holes
in the chassis..   I would like to send someone some cash for one that will
fit...  The original 4 pin socket was molded into a bracket that measured
1.5" mounting centers...  I have some of the sockets that mount into a
saddle with a guide pin and use a snap ring.....  the mounting centers are
too wide....   If anyone can help me please email:   w5jdy at cox.net
Thanks for your time...

Joe w5jdy dba,
Campus Music,
317 White Street,
Norman,Okla. 73069