[Hallicrafters] urm-25d rf probe

[Edward B Richards]

Hi Jack;

Mine uses a BNC connector on the sig gen end. I made 3 cables, one with a
PL-259 on the other end for radios using a SO-239, and one with alligator
clips on the other end for screw terminals, and one with a RCA phono plug
for those radios with a female RCA jack (Heathkit, Collins, etc). All
parts are available at Radio Shack. IIRC, you need a 10 dB, 50 ohm,
in-line attenuator for the other scale on the output meter. Good luck and
Merry Christmas.

73, Ed Richards, K6UUZ
Simi Valley, California, 93065
Home of Air Force 1 Pavilion

On Mon, 12 Dec 2005 21:03:24 -0500 "Jack Schrader" <w1jhs at midmaine.com>
writes:
> Until I get a manual I'm not sure exactly what it is called but I 
> need a rf output probe for the just aquired
> urm-25D.
> 
> Anyone have an extra one or tell me how to build one. I do have a 
> probe for another signal generator(Eico
> model 724) but it has a single pin screw on connector on it and 
> anyway i do not have the correct connector for the 25D.
> 
> Any help would be appreciated.
> 
> 73   Jack
> ______________________________________________________________
> Hallicrafters mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Hallicrafters at mailman.qth.net
> ----
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> 
>