[Hallicrafters] SX-111 RF Alignment

[Bill Gerhold]

I think after I sent the email I realized they are probably called
piston
capacitors.  Anyway, you say once the solder is gone, I will find a 1/4"

nut.  I assume this is acting as a bearing for the shaft?  If so, how do
you turn the shaft?  By hand or some tool?

   73 from K2WH   
Hallicrafters, The Radio Mans Radio
            http://www.w9wze.org/
   http://groups.yahoo.com/group/The19Group/
 

-----Original Message-----
From: hallicrafters-bounces at mailman.qth.net
[mailto:hallicrafters-bounces at mailman.qth.net] On Behalf Of
DPower1120 at aol.com
Sent: Sunday, November 28, 2004 1:54 AM
To: k2wh at optonline.net; hallicrafters at mailman.qth.net
Subject: Re: [Hallicrafters] SX-111 RF Alignment

   If you can get the solder off the caps you will find it is a 1/4 inch
nut. 
I had problems with mine, but after I got rid of the solder it aligned 
normally.
Don K0TNP
______________________________________________________________
Hallicrafters mailing list
Home: http://mailman.qth.net/mailman/listinfo/hallicrafters
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Hallicrafters at mailman.qth.net
----
List Administrator: Duane Fischer, W8DBF **for assistance**
dfischer at usol.com
----
Hallicrafters Collectors International: http://www.w9wze.org