[Hallicrafters] SX101 Help (Bill Campbell)

[Jerry Forwood]

Bill,
I forget how many but there are 3 or four screws that are reached through holes on the bottom.  They are the holding screws.  you should not remove all the front screws unless you want the front panel to come off, not a good thing as I remember.  "Been there done that".


73 de Jerry, KØEJF
E.J.(Jerry) Forwood



From: "Bill Campbell" <wd4hen at bellsouth.net>
To: <hallicrafters at mailman.qth.net>
Subject: Fw: [Hallicrafters] SX101 Help
Date: Tue, 3 Feb 2004 21:10:51 -0600

Hi guys,

I should have mentioned that I also removed the feet from the cabinet.

Thanks for the quick response but no brass ring yet.

Bill - WD4HEN

----- Original Message -----
From: "Bill Campbell" <wd4hen at bellsouth.net>
To: <hallicrafters at mailman.qth.net>
Sent: Tuesday, February 03, 2004 8:35 PM
Subject: [Hallicrafters] SX101 Help


> Hi guys,
>
> I know this should be simple (make that obvious) to remove the chassis
from
> the cabinet.  I have removed the eight screws from the front panel and
> expected the chassis to slide out the front.  No way, she will not move
even
> the slightest. Now the cabinet was repainted at some point inside and out,
> could it just be stuck to the paint?  This is a nice working rig, it just
> needs some TLC.  Don't want to mess this one up.
>
> Thanks in advance,
>
> Bill - WD4HEN
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters