[Hallicrafters] Need knobs for HT-37

[Edward B Richards]

Hi Skip;

I may have what you want. First, I am not certain that the SX-111 is the
same. The pix I have shows a skirt on the SX-111 knobs but not on the
HT-37 knobs. Maybe the skirt is removable. My knobs do not have a skirt.
I have 2 of each. One small one has a red line down the side 90 degrees
from the set-screw and a red dot opposite the set-screw. The other small
one has no line, just a dot opposite the set-screw. Your choice. Price is
$20 post paid in conus for both. They are in good condition. I have
another large one with a chip out of  the ring around the top. Thanks.

Ed Richards K6UUZ
195 Tierra Rejada Rd #80
Simi Valley, Ca 93065

On Mon, 22 Sep 2003 11:43:53 -0700 Waldo Magnuson <magnuson at mac.com>
writes:
> Hi,
> I need two knobs for my Hallicrafters HT-37 transmitter.  I need the 
> 
> large (1 5/8 in. Dia.) gray (with silver insert) frequency knob and 
> one 
> of the smaller (1 in.) gray (with silver insert) knobs.  The knobs 
> for 
> the SX-111 are the same.  Please look.  I've also posted this on the 
> 
> HCI want ads.  Thanks.
> Skip Magnuson
> 
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters
>