[Hallicrafters] HT-37 Rebuild

[Bill Gerhold]

I have thoroughly cleaned the chassis of my HT-37.  Did it by using a
small solder paste brush
And a small vacuum attachment.  The chassis cleaned up nice and shiny.
No rust spots, no
Grease.  All the tubes (except finals) are stamped Hallicrafters, the
panel lights are 2 # 44's and
1 # 47.  All 3 bulbs appear to be new, no internal blackening.  The
bulbs had the same amount
of dirt on them that the chassis did.  The rubber feet are original and
show no signs of wear at all!
 
I am in the process of changing all electrolytic caps.  Once completed I
will bring it up slowly, 
Monitorinig key voltage points.  This should happen in about 2 weeks.
 
All the above indications lead me to believe that I have acquired a rig
with very little or no use at all.  Is 
This possible?  Did Hallicrafters ever put their name on 6146's.
 
K2WH
 
 
 
 
 


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---