[Hallicrafters] No output 40/10m ht-32b

[Bob Rinaldi]

Dear Ian:

I just had the same problem....mine was corrected by using Deoxit on the band switch (and the others while I was in there), and cleaning the contacts on the TR relay..

Brought it back to full output on all bands.

73, Bob
W1CNY


--------


All outgoing mail and files scanned by GRISOFT AVG PROFESSIONAL EDITION.

www.w1cny.com/w1cny-1
  ----- Original Message ----- 
  From: Ian Szekeres 
  To: hallicrafters at mailman.qth.net 
  Sent: Monday, October 13, 2003 4:12 AM
  Subject: [Hallicrafters] No output 40/10m ht-32b


  Pulled the chassis out tonight to clean a sticky tx relay and bandswitch,
  and now I have no output in any mode on 40 and very minimal output on 10m
  (less than one watt from what I can tell)  I can attempt to tune 10m
  although it seems as though I run out of range using the driver tune
  control. There is no needle movement on 40 anywhere within the driver and
  final tune ranges. 80, 20, and 15 all tune up as before, to full output.
  Cycled the bandswitch just in case some dirt may have gotten lodged but no
  change.  I will be pulling the chassis again tomorrow to look some more, but
  was wondering if anyone had any specific places to look.

  Thanks
  --ian

  _______________________________________________
  List Administrator: Duane Fischer, W8DBF **for assistance**
  dfischer at usol.com
  ----
  Hallicrafters Collectors International: http://www.w9wze.org
  ----
  http://mailman.qth.net/mailman/listinfo/hallicrafters

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---