[Hallicrafters] SX-101A Dial Adjustment Help

[Ray V.]

Frank,

I expect the problem is the receiver is out of alignment. You want to 
align the receiver first with all the pointer adjustments set to center. 
That will give you a little +/- leeway after the alignment to provide 
for a fudge factor as the alignment shifts over time so you don't have 
to realign until it is really far out of spec.

73, Ray  W2EC

Frank Baker_new wrote:

> Hello:
> 
> I recently acquired a SX-101A. The problem I have is that the Pointer rest
> does not have enough travel to center on the correct frequency. It's around
> 100kc's low. For example 14.200 is actually 14.260  using all the pointer
> adjustments. Please send me the method to adjust if you have ran across this
> problem before
> 
> 73's Frank
> 
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters
> 
>