[Hallicrafters] HT-32

[Al Parker]

Hi Scott,
    None provides 110/120vac.  You have to provide it externally & use a
pair of dry contacts on the relay to switch it.   Use pins 3-4 nc, 3-2 no,
or 9-10 nc, 9-5 no.  pin 7 is nc to gnd, pin 6 is no to gnd.
    You really should have a manual w/schematic for every rig you own.
They're available on-line free, or reasonably priced from several manual
vendors.
73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.thecompendium.net/radio/
http://www.hammarlund.info


----- Original Message ----- 
From: "Scott Millick" <smillick at wamusa.com>
To: <hallicrafters at mailman.qth.net>
Sent: Tuesday, December 23, 2003 1:17 PM
Subject: [Hallicrafters] HT-32


> On the 11 pin connector on the back of the 32  which provide 110v for a
dow
> key and which are used for receiver mute?
>
>
>
> Scott K9SM
> 'God please save us from the Good People'
>
> If you don't know what I mean you are part of the problem.
>
> Remember another saying
>
> 'You can't fix stupid'
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters
>