[Hallicrafters] sr-2000

[John R Vodenik]

Having just rebuilt my P-2000, I would say have a look at the tubes..are
they shorted?  You could remove the plate caps and put the cover back on,
and see if you still get the overload.

John  WB9AUJ/6
VOA  Delano


On Mon, 11 Mar 2002 20:49:36 -0500 Brian Michael <brianmd1 at attbi.com>
writes:
> Recently acquired a sr-2000 with matching p-2000 supply. Receive
> functions very well, HV comes up appropriately after time delay 
> relay
> works. Both HV settings switch apropriately.  The instant the rig 
> is
> switched into transmit with no drive, it trips the overload relay in 
> the
> p-2000. Pulls heavy screen and plate current for a fraction of a 
> second
> on the meter before the overload kills the HV.
> 
> Before I start tearing the thing apart looking for the short in the
> screen or plate supply I wonder if anyone familiar with these rigs 
> has
> any suggestions regarding common failure modes.
> 
> Thanks
> 
> Brian Michael
> W1OU
> 
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF **for assistance**
> dfischer at usol.com
> ----
> Hallicrafters Collectors International: http://www.w9wze.org
> ----
> http://mailman.qth.net/mailman/listinfo/hallicrafters
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.