[Hallicrafters] dow key connections and location of SR-1 for HT-32A

[Glen Zook]

You need a 120 VAC source (i.e. plug on a cord). 
Attach one side of the cord to pin 2 of the accessory
socket and the other side to one terminal on your
Dow-Key relay coil.  Attach the other side of the
Dow-Key relay to pin 3.  Plug the cord into a 120 volt
AC socket and then you can control the Dow-Key from
the HT-32A.

The DX-100, Apache, etc., have internal AC switching
for the relay.  The HT-32A doesn't.

Glen, K9STH


--- Yardleyite at aol.com wrote:

Would anyone be able to tell me the proper way to
connect a external Dow-Key (T-R) switch to my HT-32A
for operation with a SX-101A rx?

=====
Glen, K9STH

Web sites

http://home.attbi.com/~k9sth
http://home.attbi.com/~zcomco

__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com