[Hallicrafters] wiring a stock D-104 to a HT-32

[Brian - KF2HC]

Bob,

My D-104 has white and red wires. White to the tip works fine with my HT-32.

Brian KF2HC
kf2hc at home.com

----- Original Message -----
From: Bob Raley <raley at emptychair.net>
To: <hallicrafters at mailman.qth.net>
Sent: Sunday, February 03, 2002 11:39 PM
Subject: [Hallicrafters] wiring a stock D-104 to a HT-32


> I'm in the process of wiring up a stock D-104 mic to a HT-32 and was
> wondering if anyone can tell me which wire is the audio wire and which one
> is the switch wire.  I'm using a 2 pin connector.  I've got a red wire and
a
> yellow wire to choose from.  I'm going to tie the shield to ground and the
> black wire to ground as it shows continuity with the mic stand.  I guess I
> can disassmemble the lollipop head and see which one is tied to the mic
> element for the audio but thought someone here might know right quick.
>  Thanks for your help.....................Bob kg5r