Mine is the "split tip" screwdriver.
Never leave out more than 3 screws.
The rear right under the selector was always left out when I was in the service.

Tom WB2TTY


---------- Original Message ----------
From: Ken LoCasale via GreenKeys <greenkeys@mailman.qth.net>
To: greenkeys@mailman.qth.net
Subject: [GreenKeys] Your favorite Teletype tool?
Date: Sat, 28 Mar 2026 10:50:40 -0700

My favorite tool... I found a 12" long slotted screwdriver with a 1/4"
round shank at a garage sale for a dollar. Using an eBay magnetic
sliding screw retainer, it easily accesses the four hex slotted screws
that retain the typing unit to the base. You know which screws I'm
talking about, the ones that most people leave half of them out...lol.

Your favorite tool is?

ken - wa4mnt

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys@mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to nick@navy-radio.com