"The panel is 3.5 by 9 inches. The tabs extend by 1/4 inch.The file "M26 Paper Roll - Back of cabinet", I believe is a picture of a bracket for a M26, but not sure. The rod hangs down and the paper goes from the roll, down under the rod, and then up to the printer. Dont try to have the paper roll feed directly into the printer, there needs to be some slack in the paper travel between the roll & the printer.
The width of the tab is 7/8 in."
Yes, also the roll paper mount.ThanksCecilKF6ZOK
On Saturday, April 26, 2025 at 12:39:27 PM PDT, Cecil Lale <[email protected]> wrote:
Does anyone have any pics of the roll paper assy/chute for the model 26? I am trying to build one for my 26 to use the full size roll. I don't have the original table.ThanksCecilKF6ZOK
______________________________________________________________ GreenKeys mailing list Home: http://mailman.qth.net/mailman/listinfo/greenkeys Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.htmlThis list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]