You might check what type of plug the FSK 500 takes, whether it is 2-conductor or 3-conductor, or which jack it is plugged into if there are two choices. I had the same issue with a FSK 1000. It takes a 2-conductor and I was using a 3-conductor plug which was essentially grounding the ITTY signal.

73

Kevin

W5TTY

On 8/30/2024 11:04 PM, Jomar Quilatan wrote:

Hi all,

Another newbie question I suppose...

I've got my Model 26 hooked up to the FSK 500 and the "transmit" marks and spaces are showing up well. Otherwise, it stays in Mark mode - even with the audio plugged in, the marks and spaces are not being picked up.

I have the ITTY feed playing through a cell phone plugged directly in. Is there a need to amplify the input signal for the TU to pick up the frequencies, or should that direct plugging in suffice (of course, with reasonable volume from the phone)? Otherwise I'm inclined to think that my TU is stuck in a "transmit" mode, even though it is configured to "receive" as per the documentation.

Looking forward to your input - thanks in advance!

Regards,

(- the M26 and Teletype newbie)

Jomar (Joshua Martin) Quilatan

Mississauga (Toronto), Canada

RA 0-8045
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Virus-free.www.avg.com