Daniel et. Al. I have this device. Designed for starting/stopping a TTY machine based on loop activity. Maybe a search can find the schematic for it.

https://w2hx.com/?prefix=x/Tempo/


73 Eugene W2HX
Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos


-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Daniel Jones
Sent: Friday, December 8, 2023 9:02 AM
To: GreenKeys <[email protected]>
Subject: [GreenKeys] Auto Machine Power Switch


I use a TU-170 for my machines for autostart which is convenient  because it automatically powers up the machine upon receiving a signal. I would like to build something that would allow me to do the same for 850 shift that would allow me to leave my machines on while using my military gear. 

I guess it could be audio driven or even loop driven (once it detects loop activity it turns the motor on) I would prefer a loop driven option as it would eliminate the need to differentiate between 170/850.  I could install it close to the machine if it was in a different room on an extended loop run ect…

Does anyone have any ideas on a good workable solution?

Daniel



www.K6YIC.com
[email protected]
HH#11973
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

>>> Jordan Spencer Cunningham's GreenKeys Search Tool:
>>> https://teletype.net/gksearch 2002-to-present greenkeys archive:
>>> http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive:
>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
>>> http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]