Thanks for the note, Nick!
Did anyone else do a screen grab and try to estimate the teeth on the nylon driven gear? (I agree - seems like a TD gear...)
I drew some dividing lines and tried to count the teeth in two semi-circles - from 12:00 to 6:00 and from 9:00 to 3:00, and both of those semi-circle estimates were 48 teeth, i.e. 96 total.
Problem is, I don't see 96 on the chart of driven gears for the M28 TD! maybe I drew poor lines and I'm off by a count ... there are entries in teh manual for 94 and 98 teeth, but those are 75 and 67 WPM gears, respectively.
73,
- Stan
WB7RPG
Not mine, I know nothing, etc.
Looks like maybe 60wpm gears for a KSR and for a TD.
But you better check the part numbers...
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]