I made some of the clear buttons by making a rubber mold for an acrylic cast.   Came out pretty good.    I can make more if anyone needs some.

Clay

 

 

From: greenkeys-bounces@mailman.qth.net [mailto:greenkeys-bounces@mailman.qth.net] On Behalf Of WAYNE
Sent: Tuesday, September 12, 2023 4:00 PM
To: Erik Bruchez; GREENKEYS BULLETIN BOARD
Subject: Re: [GreenKeys] Model 33 tape punch cover

 

Eric,

 

Tape punch covers are very hard to find.  It would be nice to have some 3D printed along with the clear buttons.  

 

I will email you off-list with some more info.

 

Best regards,

 

Wayne

KB1FDW

On 09/12/2023 5:27 PM EDT Erik Bruchez <erik@bruchez.org> wrote:

 

 

All,

I am restoring a Model 33 right now. Although this is not a super high priority and the machine will (eventually) work without that, it is missing its tape punch cover (with the 4 translucent buttons). Of the 3 machines in various conditions I put my hands on, none had this cover, so I assume it's a common issue.

I am curious to know if anyone ever made a replacement for this part (3D-printed?), or might have one available?

-Erik

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys@mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to teletypeparts@comcast.net