Dear Greenkeys community,<div dir="auto"><br></div><div dir="auto">When I simulate a striking motion on my model 19 (same as 15) typebar carriage, almost 1/6 of the strikers go up that shouldn’t (see attached image, only the one highlighted in green should be going up.)</div><div dir="auto">This happened after I removed and regreased the strikers. It appears to be the arm (see image) is caught on several strikers it shouldn’t be. What should I do to fix this?</div><div dir="auto"><div><img src="cid:189ddd3b7a4e672bf641" style="max-width: 100%;"></div><div><img src="cid:189ddd3c0d59bc89a632" style="max-width: 100%;"></div><div><img src="cid:189ddd3ca7c511e75623" style="max-width: 100%;"></div><div><img src="cid:189ddd3fb5763e6a2604" style="max-width: 100%;"></div><br></div><div dir="auto">Any help would be appreciated!!</div><div dir="auto"><br></div><div dir="auto">P.S. 4 keys have been removed, the springs were broken, this is temporary so you don’t need to point it out.</div>