Hi Dan - Improvise, Adapt, Overcome!  Git 'er done.....Fortunately my noise floor on 40 is low, (80 meters is constant S9+)

Are you still offline Saturday with the kids sports into the summer? (If so,  #1 priority... GREAT!!)  
We miss you on 7087,1630Z RATT.  I had a nice chat with Bill KE3BK this morning using the PRC-174, Signalink AFSK and the notebook PC/Fldigi here.  Still no real terminal.....The low dipole works great with 20 watts inside CA...Dave MQI was unavailable today but usually there too...
Will you be doing any Field Day RATT ops?  I might be able to, but probably not at 0930 Sat, maybe later in the day due to portable setup work.
73, Tim
N6CC
NNNN

On Fri, Jun 16, 2023 at 5:38 PM Daniel Jones <Djones@k6yic.com> wrote:

So I feed the autostart internet feed into my military setup from RTTY.com.  It’s not very military to have a Raspberry Pi hanging out in the midst of all my vintage gear.  My solution was to use this box that I found sometime back (it was gutted when I found it) and build the RPi into it. What you can see inside is the RPi and to the right is a small audio amplifier this provides electrical isolation from the vintage equipment to the RPi.  I also can use this to bring up SDR feeds from around the country. I can listen to the RATT net on the east coast, then listen to the 7296 net or just about any other feed that can be pulled out. 

I use it to be my Receiver through KPH or KFS SDRs since I live in an extremely high noise floor area (S7+) I still transmit from my QTH.



Daniel

www.K6YIC.com
DJones@K6YIC.com
HH#11973


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3367): https://groups.io/g/MMRCG/message/3367
Mute This Topic: https://groups.io/mt/99582450/246984
Group Owner: MMRCG+owner@groups.io
Unsubscribe: https://groups.io/g/MMRCG/leave/3821265/246984/2123290315/xyzzy [timsamm@gmail.com]
-=-=-=-=-=-=-=-=-=-=-=-