Strip printing reperf. I do not see any similar component inside my 14 FPR. Between the wiring and the extra components, I think this must be some option.

https://youtu.be/pJ6UgLDMCbk

Latest behaviour, I think the code bars need some oiling, but even with all held (this is a holding magnet selector) it is still running open, just with the bell ringing.

What mechanism prevents printing if all bars are held? Am I maybe hitting the out of paper bell?

Thanks,

-Eric

On Sun, Apr 23, 2023, 2:47 PM John W9DDD <w9ddd@tapr.org> wrote:

Hi Eric,

You say for a 14, but is it 14 TD or reperf?  The part to the left appears to be part of  the selector mechanism of a reperf.  However, the multi-pin Jones plug was more common with a 14TD or FRXD.   

John, W9DDD


> On Apr 23, 2023, at 8:56 AM, Eric Moore <mooreericnyc@gmail.com> wrote:
>
> Hi everyone. I received a spare set of parts for my model 14 (thanks Jim!) and I recognize everything but the component in the attached picture.
>
> It has 3 magnets, and runs to an expanded terminal block with a beautiful plug interface (parts are labelled as part of a pluggable system).
>
> Is this an option of some sort for paper handling perhaps?
>
> Thank you for any help as always!
>
> -Eric
>
>
> <20230423_085147.jpg>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys@mailman.qth.net
>
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd@tapr.org