See a brief description of the procedure starting at 7:50 into this video

https://youtu.be/pEQtVH3Z6n4

Looks like yours is an 1800 rpm motor like my model 15, so for 45.5 baud (22ms bit timing) it probably uses the 87.6 VPS fork like my model 15. 

See eBay listing:

https://www.ebay.com/itm/264762999861?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20180816085401%26meid%3D6d45d74d1ef746659bf014f48379bdeb%26pid%3D100970%26rk%3D1%26rkt%3D2%26sd%3D264762999861%26itm%3D264762999861%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100970.m5481&_trkparms=pageci%3A21a7a9a1-b0d2-11ed-8f8e-4e738b85911d%7Cparentrq%3A6cf47b881860a45b4a667b72fffb9024%7Ciid%3A1

Mike

On Feb 19, 2023, at 8:04 PM, Eric Moore <mooreericnyc@gmail.com> wrote:



Hello, I have a model 14 KTR that I have been working on.

I am looking for information on the governed motor it uses, picture attached.

I am told it used a tuning fork for adjustment? Does anyone have one of these, or a set of instructions?

Thank you for any help!

-Eric

<20230219_164027.jpg>

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys@mailman.qth.net

Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/

1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html

Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to deramp5113@yahoo.com