I think you are describing 2 different problems, If I am reading correctly.
Auto CR+LF and CR/LF when CR is sent from the KB.
Try removing that part first and go from there.
If you still have that problem, Then I would go to the stunt box.
 
TT

---------- Original Message ----------
From: Daniel Jones <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: Re: [GreenKeys] 28 Stunt Box Auto CR/LF
Date: Sat, 14 Jan 2023 13:24:13 -0800

So removing 157973 will defeat the end of line CR. Removing the LF bar that’s in slot 5 and replacing it with the CR bar should eliminate the line feed on CR function. 

 
Daniel 

www.K6YIC.com
[email protected]
HH#11973

On Jan 14, 2023, at 12:49, [email protected] wrote:

I don't believe I did that!!
The correct part # to be removed is: 157973.
30 lashes!!
 
TT

---------- Original Message ----------
From: "[email protected]" <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: Re: [GreenKeys] 28 Stunt Box Auto CR/LF
Date: Sat, 14 Jan 2023 20:44:24 GMT

 

FWIW, the part number to be removed is: 157193. (Plus the screw and lock washer.)
TT

Please note: message attached

From: "John, W9DDD" <[email protected]>
To: [email protected]
Subject: Re: [GreenKeys] 28 Stunt Box Auto CR/LF
Date: Sat, 14 Jan 2023 14:31:55 -0600

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]