Just feed the paper in from the top side of the platen, problem
solved!
--- ---- You said "tomorrow" yesterday. The above comments or recommendations are SWAG. Use at your own risk. John, W9DDD
I'm resurrecting a M28 printer that had very erratic line feed. Looking beneath I see some extra parts - aha - it has a reverse LF mechanism but with the 153241 cam link flopping about loose. Surely that needs a spring but there's no place to hook said spring. Finally figure out that the 153242 bracket has the spring mount broken off. No replacements here, so I fashion a spring mount and hook up a spring.
I remounted the printer to the base and now it line feeds perfectly every time - but they are all in reverse!
Back to the drawing board......Cheers,
______________________________________________________________ GreenKeys mailing list Home: http://mailman.qth.net/mailman/listinfo/greenkeys Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.htmlThis list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]