Hi all,

 

While I’m in the ASR doing “stuff” I noticed the TD is very loose on its base. I figured it was just a matter of tightening some nuts. But I realized that the nuts could not tighten any further and there was still movement. I looked at the other screws and saw one had a rubber isolator and the other two did not. Surely this is my issue as the rubber takes up some of the space needed to tighten against the nuts.

 

Anyone have 2? Or is this a job for Mr. RTTY? I’d have to figure out the part number (these TTY part breakdowns give me a headache!).

 

https://w2hx.com/x/TTY/misc/20221226_145700.jpg

https://w2hx.com/x/TTY/misc/20221226_145705.jpg (showing the one isolator)

https://w2hx.com/x/TTY/misc/20221226_145710.jpg (nut removed for photo)

https://w2hx.com/x/TTY/misc/20221226_145726.jpg (showing the lack of an isolator).

 

Thanks all

 

73 Eugene W2HX
Subscribe to my Youtube Channel: https://www.youtube.com/@w2hx/videos

 

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/

1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html

Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]